Electrochemistry Laboratory
The Electrochemistry Laboratory (EC-Lab) is located in the LOB-021 and LOB-023 rooms. The person in charge is Valentin VINCI - Tel. 2231. This is a laboratory open to all ESRF users (requested by many beamlines), both for staff and external users. The EC-Lab can host more than one user group simultaneously.
This laboratory is equipped with all the tools necessary to carry out clean electrochemical experiments including two chemistry fume-hoods, several preparation benches, chemicals and standard laboratory equipment, like ultra-pure water, potentiostat pool, heating/stirring plates, balance, glassware, ultrasonic bath, pH meter, etc...
The lab was extended to the next location room LOB-021 in January 2026:
- The room LOB-021 hosts two glove-boxes from the MBRAUN brand dedicated to Li and Na based battery research, and one dedicated to sulfur based material. All of them are available for ESRF users.
- The room LOB-023 is equipped with the two chemistry fume-hoods and is be dedicated mainly for experiments preparation using wet chemistry methods.
.
The Electrochemistry Laboratory / LOB-021
The Electrochemistry Laboratory / LOB-023
How to use the Electrochemistry Lab
The access to the EC-lab can be requested using the A-form.
For obvious reasons, a complete set of information is required for processing your request. You must :
- Complete the "EC-Lab Experimental Form" (excel document), providing detailed information on the following points:
- Intended manipulations at the laboratory (give relevant key-words or a concise description).
- Chemicals/equipment/consumables needed.
(Any "Risk Analysis" or "Description of Experimental Set-up" which you may already have sent to the Safety Group is irrelevant for answering (1) and (2)).
- Complete your "User Declaration Form: Use of the Electrochemistry Lab" (word document).
- This form has to be duly filled in and signed by the appropriate person (one form per affiliation, please).
Please download, complete and return these forms as soon as possible (at least 15 working days prior to the experiment).
Indicate clearly the period when you need the laboratory on your form and use and, if possible, use the following format to name the completed documents :
yyyy-mm-dd_NAME_expnumber_EC_lab_Exp_Form.xlsx/xls and
yyyy-mm-dd_NAME_expnumber_EC_lab_UdF.doc/docx/pdf
(yyyy-mm-dd being the date you would like to start using the lab).
If you have any additional questions related to your experiment, please do not hesitate to contact us.
Access to the Electrochemistry Laboratory
To access the EC-Lab, you will be given an access badge on arrival at the ESRF. There is only one badge per user group, so please share it with your collaborators during the approved period (experiment preparation and beamtime). Contact Valentin Vinci (Tel. 2231) for the badge.



