There are a number of detectors that are available on ID01. For most applications using small beams (SXDM or BCDI), a 2D Maxipix (Si/GaAs) detector with 516x516 pixels and 55 micron pixel size, 2D Eiger (Si) detector with (1030x2164 pixels) 75 micron pixel size, CITIUS 840k (Si) (1184x728 pixels) 72.6 micron pixel size 

For DFXM, an Andor Zyla 5 Megapixel cmos/ scintillator based camera with 7 micron pixel size is the most adapted device

Other detectors can be used occasionally upon request.

 

Here is an overview of the detectors:

Type Medium Vacuum compatible Application Energy range (keV) Energy resolution
dE/E(%)		 Dynamic range Remarks
Point detectors (occasional use)
Pin diodes (callibrated) SI diode Yes alignment/calibration 4-20  N.A 1013 or more Energy calibrated
ROENTEC (Solid state) Si No Energy resolved 1-15 1%    
 
Area detectors (mostly the best solution)
CITIUS charge integrating detector No Nanodiffraction/ CDI 6-17 N. A. 3 x 107  0.4-2.2
Eiger photon counting pixel detector No Nanodiffraction/ CDI 6-17 20%

8 x 105 

ph/s/pixel

 0.4-1.4 m, 3-6.5 m (horizontal plane only) 
Maxipix photon counting pixel detector No Nanodiffraction/ CDI

6-17

(Si)

20+ (GaAs)

 40%

1 x 105

ph/s/pixel

 0.4-2.2
Andor Zyla GdOS or CsI scintillators fiber coupled to CMOS Yes in detector box only for full field imaging in long detector arm (2.5 to 6.5 m from sample 6-40 N.A.

3 x 104

ph/s/pixel

 2.5-6.5 m