Important: The gas rig system for catalysis experiments that was available in BM26A EXAFS beamline is not available at BM14, the new EXAFS beamline. 

Another gas often used is He. This gas is released in experiments with superconducting magnets as a boil off product, and on an exceptional basis is used as a method to reduce X-ray absorption and parasitic scatter by air. Since He is a dwindling, non renewable resource He recovery systems have been installed on both beamlines. When using He experimenters are expected to use these recovery systems and make sure that the measured He recovery rate is not less than 95%. The design of the He-gas environment and connection to the recovery system is the responsibility of the users.

Experiments with a higher wastage will not be accepted for both financial as well as societal reasons. With the emphasis on the latter. In the case users insist on having the possibility of a higher He consumption this will not be stopped but they are expected to carry the costs of the He consumption.

On the website one can find an easy tool to calculate the energy and path length dependent X-ray absorption in air and He atmospheres.


Absorption by air for a path length of 5 cm and 50 cm calculated with the help of the CXRO website

It will be clear for any experimenter that a reduction in intensity by 3% of the incoming X-ray beam, and the extra background generated by this will in X-ray scattering or spectroscopy not be the rate limiting step in an experiment. The effect in background reduction might be visible but will not mean the difference between a successful or non-successful experiment. See also: (

[1] Vladimir  Martis,  Andrew M.  Beale,  Dirk  Detollenaere, Dipanjan Banerjee, Martine  Moroni,  Fabrice  Gosselin and  Wim  Bras, A high pressure and controlled flow gas system for catalysis research; J. Synch. Rad. (2014)  vol. 21(2);  online: