| Scalar Attributes |
| Attribute name |
Data Type |
R/W Type |
Expert |
| acqMode: Write : Acquisition mode 0 = Focus 1 = Sequence |
DEV_LONG | WRITE | No |
| checkTemperature |
DEV_BOOLEAN | WRITE | No |
| depth: Read : detected depth of the CCD in bits (8/16/24/32) |
DEV_LONG | READ | No |
| exposure: Write : desired exposure time in ms |
DEV_DOUBLE | WRITE | No |
| fileFormat: NOT USED : for compatibility with CCD abstract device |
DEV_STRING | WRITE | Yes |
| fileName: NOT USED : for compatibility with CCD abstract device |
DEV_STRING | WRITE | Yes |
| frames: Write : number of frames to take in each sequence Read : current number of frames taken |
DEV_LONG | READ_WRITE | No |
| height: Read : detected height of the CCD in pixels |
DEV_LONG | READ | No |
| nbROI: Write : number of roi to take in consideration |
DEV_LONG | WRITE | No |
| numFrame: Write : select frame number |
DEV_LONG | WRITE | No |
| rotateImage |
DEV_LONG | WRITE | No |
| saturation |
DEV_DOUBLE | READ | No |
| saturationAlarm |
DEV_DOUBLE | WRITE | No |
| saturationMax |
DEV_DOUBLE | WRITE | No |
| shutterMode: 0=OPEN_NEVER, 1=OPEN_PRE_EXPOSURE, 2=OPEN_PRE_SEQUENCE, 3=OPEN_PRE_TRIGGER, 4=OPEN_NO_CHANGE |
DEV_LONG | WRITE | No |
| temperature: Write : temperature set point Read : measured temperature |
DEV_DOUBLE | READ_WRITE | No |
| timing: Write : software trigger timing (ms) Read : measured time between frames (ms) |
DEV_DOUBLE | READ_WRITE | No |
| trigger: Write : trigger mode 0 = freerun 1 = software trigger 2 = external trigger, positive edge 3 = external trigger, negative edge |
DEV_LONG | WRITE | No |
| useROI: Write : using roi setup true = use defined roi false = do not use roi |
DEV_BOOLEAN | WRITE | No |
| width: Read : detected width of the CCD in pixels |
DEV_LONG | READ | No |
| shutterCloseDelay |
DEV_DOUBLE | WRITE | No |
