TANGO
Device Server
Device Server
|
|
|
|
|
|
Device Server |
| |
||
| TriggerSource | Tango::DEV_STRING | The name of the terminal for the input trigger as specified by NI (PFIxx).
The trigger can be configured as following: - for finite and continuous modes, this trigger can be used as a start trigger (cf UseExtStartTrigger). If no start trigger is used, a counter of the board will be used to start all the other counters. - for retrig mode, each trigger will launch the generation of a pulses train. So the possible values are PFIxx |
| BoardName | Tango::DEV_STRING | The name of the board. |
| AutoStart | Tango::DEV_BOOLEAN | If true, the generation will start at device startup and when command "Init" is executed. |
| Clock | Tango::DEV_STRING | The clock used. Possible values are "INTERNAL" or "PFIxx", with xx the pin number. |
| ExternalFrequency | Tango::DEV_DOUBLE | In case of using an external clock, the frequency of this clock in Hz. |
| IdleStateCounter0 | Tango::DEV_STRING | cCan be LOW or HIGH. |
| IdleStateCounter1 | Tango::DEV_STRING | |
| IdleStateCounter2 | Tango::DEV_STRING | |
| IdleStateCounter3 | Tango::DEV_STRING | |
| IdleStateCounter4 | Tango::DEV_STRING | |
| IdleStateCounter5 | Tango::DEV_STRING | |
| IdleStateCounter6 | Tango::DEV_STRING | |
| IdleStateCounter7 | Tango::DEV_STRING | |
| UseExtStartTrigger | Tango::DEV_BOOLEAN | If true, use the TriggerSource to start the generation in Finite or Continuous Mode. |
| TriggerEdge | Tango::DEV_STRING | values : POSITIVE or NEGATIVE. Set if the external trigger is posivite edge or negative edge. |
| Property Name | Default Values |
| TriggerSource | No default value |
| BoardName | No default value |
| AutoStart | No default value |
| Clock | No default value |
| ExternalFrequency | No default value |
| IdleStateCounter0 | No default value |
| IdleStateCounter1 | No default value |
| IdleStateCounter2 | No default value |
| IdleStateCounter3 | No default value |
| IdleStateCounter4 | No default value |
| IdleStateCounter5 | No default value |
| IdleStateCounter6 | No default value |
| IdleStateCounter7 | No default value |
| UseExtStartTrigger | No default value |
| TriggerEdge | No default value |
TANGO is an open source project hosted by :
|
Core and Tools :
CVS repository on
tango-cs project
Device Servers : CVS repository on tango-ds project |