TANGO
Device Server
Device Server
|
|
|
|
|
|
Device Server |
| |
|||
| Calib_source: set/query internal calibration source state, 0 - off, 1 - to channel 1, etc. | |||
| Conf_capacitor: set feedback capacitor 0 - 100 pF, 1 - 3300 pF | |||
| Conf_hv_max: set maximum allowable hv setting in volts | |||
| Conf_intavg: the number of integrations to average per reading, 1 to 15 | |||
| Conf_hv_set: set the external hv in volts | |||
| Conf_monitor: thset the position function that is performed internally by the I404 and the signals that are put out on the analog voltage and frequency monitor 1 no position calculation 2 quadrant mode calculations 3 split mode calculations | |||
| Conf_period: tthe integration period in seconds | |||
| Conf_pos_polarity: set/query the polarity of the current readings used for the calculations 0 - +ve, 1 - -ve | |||
| Conf_pos_threshold: set/query threshold (in per cent of full current scale in use) for data to be included in position calculations | |||
| Conf_range: set/query a full scale current range in amps, integration period and capacitor selection are calculated by the I404 | |||
| Conf_readavg: set/query the number of adc readings to be taken in each integration period | |||
| Conf_resolution: set/query the number of bits of effective resolution, 16 - 20, the i404 calculates the number of integration periods and adc readings per integration | |||
| Read_current1: query current reading of channel 1 | |||
| Read_current2: query current reading of channel 2 | |||
| Read_current3: query current reading of channel 3 | |||
| Read_current4: query current reading of channel 4 | |||
| Read_integrationtime: integration time used | |||
| Read_hv: read hv output sense | |||
| Read_position_x: perform position calculation in configured mode | |||
| Read_position_y: perform position calculation in configured mode | |||
| Syst_frequency: set/query the dominant noise frequency in Hz to be suppressed in the calibration routine, 50 or 60 Hz | |||
| Syst_save: 0 do not go to safe state when disconnected, 1 - go to safe state when disconnected (hv off) | |||
| Syst_serial: query the system serial number | |||
| Position_x: x-position, in standard P-3 coordinate frame | |||
| Position_y: y-position, in standard P-3 coordinate frame | |||
| Factor_x: position_x = read_position_x * factor_x | |||
| Factor_y: position_y = read_position_y * factor_y | |||
TANGO is an open source project hosted by :
|
Core and Tools :
CVS repository on
tango-cs project
Device Servers : CVS repository on tango-ds project |