|A class which performs a scan with an XBPM motorisation while getting measures from a Brehmstrahlung sensor.
|This device server is dedicated to the control of the new current transformer (new CT + Keithley 6220 current source + Keithley 2701 digital multimeter).
|This class is intended to drive a National Instruments digital multimeter type 4070.
|Tango Device Class
|A class to manage libera network links and status of the Fast Orbit FeedBack
|This device server is intended to control the fast steerers.
|This class allows to control Hazemeyer CIT 8.4 APT power meter.
|This device server is intended to drive a Keithley 2701 digital multimeter (DMM). A 7706 multiplexer card must be installed inside the DMM, it is used for the calibration of the cu...
|This device server is intended to control a Keithley 6620 precision current source over a serial line.
|MasterSource tango device server. This class uses the gpibDevice object.
|Implement the interface of the multibunch feedback device. The device is a client of the LiberaAccess device server and define a certain number of attributes from the FPGA paramete...
|This class is dedicated to the control of multiple fast steerers, enabling global settings like "set all to ON" or "set all to OFF".
|Pin Diode readout for ID14-3 mono control using NI EDAQ board and COMEDI
|This Class is a server to get and convert data recieved from icv150 in vme026.
|This class implements the tune measurement for the booster synchrotron. A number of tune values should be calculated for an acceleration cycle of the booster. A shaker is used to e...
|This is a wrapper for the old Taco ccd interface
|This class is able to calculate beam tune using ECDR compact PCI board. This board has two input channel (vertical and horizontal) each one is separated in two sub-channel (vertic_...
|This is the Tune server. This server interact with the Agilent_4395a server and the Taco tune server. Almost all functionnalities of Tune Monitor application will be deported in th...
| This project is a re-write of the previous TuneServer using new Tango features (Tango 5 and above).
This server interact with the Agilent_4395a class and the Taco tune server.<...
|This class is able to controle a Lecroy WaveMaster Oscilloscope.
|This device server handles the Machine Transfer Efficiency hardware based a CUB C-PCI card equipped with an add-on mezzanine card. This card hold a virtex programmable component we...
|This server normally handles only one PCT device.
TANGO is an open source project hosted by :
Core and Tools :
CVS repository on
Device Servers : CVS repository on tango-ds project