TANGO

Device Servers

WARNING: These classes have been developped for a specific usage and are not guaranteed for all platforms.


14 InputOutput Classes hosted by ESRF
Class Name
Lang
Repos
Description
AdcDac
C++
CVS
This Class wil have a 'value' attribute. This attribute is read on an Adc channel and is written on a Dac channel. Its state will be FAULT if one of the 2 devices Adc or Dac is in ...
CPCI412
C++
CVS
A class to control the ADAS cpci412 acquisition board and log data.
CryoCtrl
C++
CVS
this class controls a cryogenic generator connected to a wago controller. It supposes that 4 signals are connected to 4 ADC channels of the controller. the 4 signals are: Temperatu...
Cubds
C++
CVS
This class allows to access the inputs and outputs registers of the AMCC used as PCI interface on the CUB cards. It is undependant of the FPGA embedded application.
Dac712
C++
CVS
This class will allow to manage an icv712 board.
Gesdac2b
C++
CVS
Gesdac2b single channel DAC class.
Icv101
C++
CVS
This device server controls the ADAS Icv101 ADC board.
Icv150
C++
CVS
This class will allow to control an ICV150 board.
IncaaAdc
C++
CVS
Device server to control Incaa Analogic to Digital converter.
SAdc150
C++
CVS
This device server will control any channel of the ADAS ICV150 analog to digital converter board.
SDac712
C++
CVS
This device server will control any channel of the ADAS ICV712 digital to analog converter board.
TacoRelay
C++
CVS
Wrapper tango for the taco pulsed relays.
WagoAdc
C++
CVS
Instanciate one object per adc channel
Wagojacks
C++
CVS
class to handle a jacks controlled via a wago controller. A jack should have a digital output to send the command 2 digital inputs to detect the position of the jack.



Last Update: Thu Oct 06 08:47:42 CEST 2011


TANGO is an open source project hosted by :
Sourceforge logo small 		Core and Tools : CVS repository on tango-cs project
Device Servers : CVS repository on tango-ds project