± 9T (along the Beam), can be ramped at 8 Tesla per minute; ± 4T (perpendicular to the Beam), can be ramped at 2 Tesla per minute

Max Temperature >5K (Laser heating); including in-situ sample preparation system

UHV: 10-10 to 10-11 mbar

Minimal sample size: 0.7 × 0.05 mm

Polycrystalline samples need to be 3 mm thick

Single crystals that need to be fractured in vacuum need to be 5 mm high.

Single crystals that need to be sputter-cleaned can have up to 10 mm diameter, and be typically 2-3 mm thick

 

ID32Magnet1.jpg

High-field magnet

High Field Magnet

Cryogenic

ID32 - SOFT X-RAY SPECTROSCOPY