Beamline Instrument Software Support |
|
SPEC Macro documentation:
[ Macro Index |
BCU Home ]
|
ICE.MAC | ||||||
[ source code | installed at | configured at ] | ||||||
See other macros in category: Positioning Isg | ||||||
Description:
| ||||||
Documentation:
| ||||||
Macros:
Usage: icepap_info [hostname|motor] Print out information on the specified ICEPAP system or on an ICEPAP motor configured in the current SPEC session. icepap_firmware_check Usage: icepap_firmware_check [hostname|motor] Check the firmware version(s) of the specificied ICEPAP system or ICEPAP motor configured in the current SPEC session. icepap_reset Usage: icepap_reset [hostname[:port]] Reset all the racks of the specified ICEPAP MASTER icepapenc_read Usage: icepapenc_read (<counter_mnemonic>) Returns value of encoder associated to macro-counter <encoder_mnemonic>. This function is similar to the previous one but provided to be user-callable by beeing more user-friendly. icepap_setenc Usage: icepap_setenc counter position MACRO COUNTER: ENCODER Force the value of an ICEPAP encoder configured as a SPEC counter icepap_all Usage: icepap_all hostname cmd [args] Execute the specified command with its args on all ICEPAP modules (MASTER, SLAVES and DRIVERS) known by the hostname. Note that quotes must be used when cmd includes a hash for the acknowledge. upgrade_firmware_1_22 Usage: upgrade_firmware_1_22 hostname Upgrade the specified icepap system from firmware 1.22 to 2.0 If called from SPEC wizard mode, the security of the mandatory same subnetwork is bypassed. icepap_alldis Usage: icepap_alldis hostname Will try to guess if the DISDIS parameter is really needed on each DRIVER of the specified ICEPAP systerm. If not needed, the macro will remove it. WARNING: this macro is for temporary usage only. icepap Usage: icepap [hostname[:port]] Console implementation to communicate to icepap MASTER icepap_rprog Usage: icepap_rprog [hostname[:port] [file] [rack ... ]] Program a the ICEPAP specified list of racks using the rack back plane serial line. icepap_prog Usage: icepap_prog [hostname[:port] [file] [addr] [options]] Program a the ICEPAP module with the specified binary file icepap_history Usage: icepap_history () Print out the history of commands sent to ICEPAP systems | ||||||
Internal Macros: | ||||||
Usage: icepapdebug [personal msg] Switch on or off the print of debug messages icepap_fiforst Usage: icepap_fiforst(dev) Reset socket communication and MASTER FIFOs icepap_cleanup Usage: icepap_cleanup(dev) Called on <Ctrl-C> icepapdebug_init Usage: icepapdebug_init Needed to initialize debug print out macro the first time the file is loaded. icepap__tocase Usage: icepap__tocase (string, case) Convert to lower (case==1) or to upper (case==0) case the string passed icepap__tolower Usage: icepap__tolower (string) Return the lower string of the string passed icepap__toupper Usage: icepap__toupper (string) Return the upper string of the string passed icepap_trim Usage: icepap_trim (string) icepap_round Usage: icepap_round (x) Return a well rounded integer as opposed to int() which always round down icepap_chkerr Usage: icepap_chkerr (ans) Check if the answer given contains an ERROR and if yes request the error message _icepaplib_check Usage: _icepaplib_check () Check if the IcePAP library can be used through the dedicated TANGO DS. Returns non null if usable. _icepaplib_access Usage: _icepaplib_access Macro to get access to the TANGO DS using the IcePAP library _icepaplib_create_group Usage: _icepaplib_create_group (group_name) Creates a group with the specified name. If the group already exists, it will be emptied WARNING: this implies that groups can not be shared accross different SPEC sessions. _icepaplib_create_axis Usage: _icepaplib_create_axis (mne, flags) Add a new axis to defaut group or to a given group if motor mne has a parameter "group" defined. Returns 0 if success otherwise -1 _icepaplib_prestart_all Usage: _icepaplib_prestart_all () _icepaplib_start_one Usage: _icepaplib_start_one (mne, pos_in_steps) _icepaplib_start_all Usage: _icepaplib_start_all () _icepaplib_get_status Usage: _icepaplib_get_status (mne) Returns the move and limit status of a single motor (bit mask) or the string ".error.". If the library can not be used, returns -1 _icepaplib_get_position Usage: _icepaplib_get_position (mne) Returns the position single motor or the string ".error.". If the library can not be used, returns ".error." _icepaplib_stop Usage: _icepaplib_stop (mne) Stops a single motor or the string ".error.". If the library can not be used, returns -1 _icepaplib_power_axis Usage: _icepaplib_power_axis (mne, power) Change the power of the specified axis. The argument can be "ON" or "OFF". Returns 0 if success otherwise -1 icepap_config Usage: icepap_config(num,type,p1,p2,p3) MACRO MOTOR: Called by spec after reading the config file icepap_par Usage: icepap_par(num,key,todo,p1) MACRO MOTOR: Called by spec after reading the config file, after calling _config() and only if parameters are set in the config file for a motor. _icepap_prestart_all Usage: _icepap_prestart_all(dev) MACRO MOTOR: _icepap_start_all Usage: _icepap_start_all(dev) MACRO MOTOR: _icepap_start_one Usage: _icepap_start_one(dev, addr, pos) MACRO MOTOR: icepap_cmd Usage: icepap_cmd(num,key,p1,p2) MACRO MOTOR: Called by spec on motor operation. _icepap_print_info Usage: _icepap_print_info (dev,addr,mne) _icepap_print_info_driver Usage: _icepap_print_info_driver (dev,addr) TODO: unify with icepap_info macro _icepap_print_tabbed Usage: _icepap_print_tabbed(tab,str) _icepap_print_info_mot Usage: _icepap_print_info_mot (motor) _icepap_print_info_system Usage: _icepap_print_info_system (hostname) _icepap_fw_check_mot Usage: _icepap_fw_check_mot (motor) _icepap_fw_check_system Usage: _icepap_fw_check_system (hostname) _icepap_fw_compare Usage: _icepap_fw_compare (rev1, rev2) Compare deux revisions, given as strings, and returns: 0 if rev1 equal rev2 1 if rev1 > rev2 2 if rev1 < rev2 -1 if invalid revision numbers _icepap_fw_controller Usage: _icepap_fw_controller (hostname) Returns, for the specified system, the firmware version of the CONTROLLER _icepap_fw_driver Usage: _icepap_fw_driver (hostname, addr) Returns, for the specified system, the firmware version of the DRIVER specified by its address. _icepap_fw_saved Usage: _icepap_fw_saved (hostname) Returns, for the specified system, the firmware version saved in flash icepap_lock Usage: icepap_lock axis CONFIG LOCK: Add a lock on the specified axis (ex: 0/2) icepap_unlock Usage: icepap_unlock axis CONFIG LOCK: Remove a lock on the specified axis (ex: 0/2) _icepap_islockfile Usage: _icepap_islockfile() CONFIG LOCK: Check that lock file exist and create empty if not _icepap_lock Usage: _icepap_lock (axis,lock) CONFIG LOCK: Add or remove (lock=1 or 0) a lock on the specified axis (ex: 0/2) _icepap_islock Usage: _icepap_islock (axis) CONFIG LOCK: Return 1 if a lock exist for the specified axis (ex: 0/2) Return 0 if there is no lock. Return -1 in case of error. _icepapcnt_gettemp Usage: _icepapcnt_gettemp (hostname:port, address) MACRO COUNTER: Read the temperature on the specified address Returns 0 in case of error icepapcnt_config Usage: icepapcnt_config(num,type,p1,p2,p3) MACRO COUNTER: Called by spec after reading the config file icepapcnt_cmd Usage: icepapcnt_cmd(num,key,p1,p2) MACRO COUNTER: Called by spec on counter operation. _icepapenc_getpos Usage: _icepapenc_getpos (<counter_number>, <hostname:port>, <address>) MACRO COUNTER: ENCODER Read the encoder position on the specified address Returns 0 in case of error _icepapenc_setpos Usage: _icepapenc_setpos (counter, hostname:port, address, pos) MACRO COUNTER: ENCODER Set the encoder position on the specified address Returns 0 in case of error _icepap_setenc Usage: _icepap_setenc (counter_mne, position) MACRO COUNTER: ENCODER Force the value of an ICEPAP encoder configured as a SPEC counter icepapenc_config Usage: icepapenc_config(num,type,p1,p2,p3) MACRO COUNTER: ENCODER Called by spec after reading the config file icepapenc_cmd Usage: icepapenc_cmd(num,key,p1,p2) MACRO COUNTER: ENCODER Called by spec on counter operation. icepapcalc_config Usage: icepapcalc_config(num,typ,p1,p2,p3) MACRO COUNTER: Called by spec after reading the config file icepapcalc_cmd Usage: icepapcalc_cmd(num,key,p1,p2) MACRO COUNTER: Called by spec on counter operation. icepapmeas_config Usage: icepapmeas_config(num,type,p1,p2,p3) MACRO COUNTER: MEASURE Called by spec after reading the config file icepapmeas_cmd Usage: icepapmeas_cmd(num,key,p1,p2) MACRO COUNTER: MEASURE Called by spec on counter operation. _icepap_all Usage: _icepap_all (hostname,cmd) _icepap_get_addrs Usage: _icepap_get_addrs (hostname) Returns the addresses of all ICEPAP modules alive on the specficed hostname. The addresses are returned in a single string, blank separated. _is_package_installed Usage: _is_package_installed (bliss_package_name) _is_same_subnetwork Usage: _is_same_subnetwork (icepap_hostname) _is_valid_version Usage: _is_valid_version (firmwares_list) _is_alive Usage: _is_alive (icepap_hostname) _emulate_alldis Usage: _emulate_alldis (dev, addr_list) Bypass external disable signal on the list of drivers given. (this was done with DISDIS command on old firmwares <2.0) Works only on firmware >=2.0 _emulate_onedis Usage: _emulate_onedis (dev, addr) Bypass external disable signal on the driver given. (this was done with DISDIS command on old firmwares <2.0) Works only on firmware >=2.0 _icepap_alldis Usage: _icepap_alldis(dev, silent) _icepap_getdev Usage: _icepap_getdev (string, n) Parse the string to get the ICEPAP device to talk to. Try to get as nth argument (starting from 1) in the string, if not prompt the user. _icepap_getfname Usage: _icepap_getfname (string, n) Parse the string to get the ICEPAP tocho file. Try to get as nth argument (starting from 1) in the string, if not prompt the user. _icepap_getaddr Usage: _icepap_getaddr (string, n) Parse the string to get the addr for programming. Try to get as nth argument (starting from 1) in the string, if not prompt the user. _icepap_getopts Usage: _icepap_getopts (string, n) Parse the string to get the options for programming. Try to get as nth argument (starting from 1) in the string, if not prompt the user. Any remaining argument is also return as option. _icepap_getracks Usage: _icepap_getracks (string, n) Parse the string to get the rack addresses for programming. Try to get as nth argument (starting from 1) in the string, if not prompt the user. Any remaining argument is also return as option. _icepap_prog Usage: _icepap_prog (dev,fname,addr,opt) Program a the ICEPAP module with the specified arguments. If no firmware file name is given, the programmatino will used the firmware saved in the controller flash. _icepap_wrbin Usage: _icepap_wrbin (dev,fname) Send the contain of the file to the ICEPAP using the ISG binary transfer protocol. icepap_mdspreset Usage: icepap_mdspreset [hostname:port] Reset the MASTER DSP icepap_ddsppgm_sl Usage: icepap_ddsppgm_sl [hostname:port [driver]] Program one or all DRIVER DSP numbered from 1 to 8 using the backplane serial line and the DDSP programm taken from MDSP flash (no binary transferred) _icepap_check Usage: _icepap_check (hostname:port) Do not touch, needed by the "raleur" _icepap_close Usage: _icepap_close (hostname:port) _icepap_err Usage: _icepap_err _icepap_warn Usage: _icepap_warn _icepap_stopcode Usage: _icepap_stopcode (num, status) Decode stop reason for the driver status given. No action, print only for diagnostic _icepap_wr Usage: _icepap_wr (dev,addr,cmd) _icepap_wrrd Usage: _icepap_wrrd (dev,addr,cmd) _icepap_query Usage: _icepap_query (dev,addr,cmd,silent) _icepap_patch Usage: _icepap_patch () Temporary patch _icepap_patch_email Usage: _icepap_patch_email () Temporary email after patch _icepap_email Usage: _icepap_email (message) Send an email with the specificied patch _icepap_hist_init Usage: _icepap_hist_init () Init the ICEPAP history if needed _icepap_hist_add Usage: _icepap_hist_add (dev,cmd) Add to the ICEPAP history an entry _icepap_hist_append Usage: _icepap_hist_append (str) Append a string to the last line in the ICEPAP history _icepap_hist_dump Usage: _icepap_hist_dump () Return a string with the history of commands sent to ICEPAP systems icepap_duplicate_conf Usage: icepap_duplicate_conf (dev,src_addr,dst_addr) Will copy the source driver configuration to the destination one (bypass of icepapcms) ex: ("iceid207",11,25) | ||||||
|